Bitcoin bears have been dominant for the last 3 weeks or so, with sentiment increasingly leaning on the side of FUD. However, fresh signs indicate the possibility of a bullish conclusion for Bitcoin price in the last week of February.
According to CryptoQuant analyst ShayanBTC, Bitcoin open interest has been on the rise despite the cryptocurrency’s struggle to find a bullish footing. This observation could indicate that BTC is finally ready for a bit of recovery.
The uptick in open interest may indicate a demand build up, an outcome that is already reflecting in Bitcoin price action. The cryptocurrency has so far achieved substantial upside in the last 3 days, with price recovering from a low of $93,34 to a $97,010 press time price tag.
Bitcoin price action | Source: TradingView
BTC’s bullish recovery in the last 3 days was courtesy of liquidity injection observed as per the MFI. Its MACD was about to make a crossing above the signal line, with the histogram profile demonstrating a decline in bearish volume.
Is Bitcoin Price demand building up?
While the price and rising open interest may be leaning in favor of the bulls, they were not the only signs. For example, Bitcoin’s spot flows have mostly been negative since the start of February. However, outflows have notably declined and this gives the bulls a chance to dominate.
Bitcoin spot flows | Source: Coinglass
It is however worth noting that spot flows were yet to demonstrate a substantial uptick. This may indicate weak demand. On the derivatives side, futures open interest bounced back above $60 billion in the last 10 days, confirming renewed interest at sub- $100,000 prices.
– Advertisement –
Still on demand build-up, exchange flows recently dropped to key levels where they pivoted twice in January. This historically significant level may offer a psychological buy back zone and exchange outflows were already higher than inflows at the time of observation.
Bitcoin Exchange flows | Source: CryptoQuant
Higher exchange outflows than inflows signal that the bulls might already be putting in some work. However, a modest gap of about 2,000 BTC between inflows and outflows may indicate that the market is still in a cautious mood.
Can Strategy inject more optimism into BTC demand?
Michael Saylor and his Strategy team have for the most part, offered a confidence boost to the market in times of doubt. The company might be about to do so once again as revealed in its latest announcement.
Strategy is reportedly planning to issue about $2 billion worth of convertible notes to purchase more BTC. The company has been taking advantage by purchasing BTC especially every time it dips below $100,000.
A $2 billion liquidity injection into BTC especially now that the bears are easing off their attack, could pave the way for recovery above $100,000. These observations may trigger enough excitement for Bitcoin to possibly achieve a net positive performance in the next 8 days.
Life moves fast, and keeping up with your grooming routine can sometimes feel like an afterthought. Whether you’re rushing to a meeting, packing light for a trip, or just trying to simplify your daily routine, finding a grooming tool that’s as versatile and on-the-go as you are can be a fantastic option. That’s where the TinyEdge pocket shaver steps in. Compact, efficient, and cleverly designed, this little device promises to make grooming effortless, no matter where life takes you.
Imagine having a shaver so small it fits in your pocket, yet powerful enough to handle everything from a quick beard trim to nose hair touch-ups. The TinyEdge isn’t just about convenience—it’s about rethinking how we approach grooming altogether. With its battery-free operation, durable titanium blades, and waterproof design, it tackles the everyday challenges of personal care with ease. Whether you’re tired of lugging around bulky gadgets or constantly worrying about dead batteries, this innovative tool offers a fresh, no-fuss solution.
The TinyEdge Pocket Shaver: Compact and Efficient Grooming
Early bird backing offers are now available for the inventive project from roughly $69 or £55 (depending on current exchange rates), offering a considerable discount of approximately 36% off the normal retail price, while the Kickstarter crowd funding is under way.
Key Specifications :
Compact and lightweight design (68 grams) for easy portability, ideal for travel or daily use.
Battery-free operation with Type-C connection for power from smartphones, power banks, or laptops.
Titanium blades with 7,000 RPM high-speed motor and 0.07mm mesh for precise, irritation-free shaving.
IPX7 waterproof rating, magnetic assembly, and easy cleaning for versatile wet or dry shaving.
Includes NFC functionality and doubles as a nose hair trimmer for added convenience and innovation.
The TinyEdge pocket shaver provides a compact, durable, and efficient solution for modern grooming needs. Designed with portability and practicality in mind, this device caters to individuals seeking convenience without compromising on performance. Whether at home, traveling, or on the go, the TinyEdge delivers a seamless grooming experience through its thoughtful design and advanced features.
If and when the TinyEdge campaign successfully raises its required pledge goal and the project progresses smoothly, worldwide shipping is expected to take place sometime around April 2025. To learn more about the TinyEdge tiny pocket shaver that attaches to your phone for power project browse the promotional video below.
Weighing just 68 grams and smaller than most headsets, the TinyEdge is exceptionally lightweight and easy to carry. Its minimalist design allows it to fit effortlessly into a pocket or bag, making it an ideal companion for travel or daily commutes. Despite its small size, the shaver features a sturdy, integrated body that combines durability with a sleek, unobtrusive appearance. This balance of portability and reliability makes it a practical choice for those who value efficiency in their grooming tools.
Innovative Power and Blade Technology
One of the standout features of the TinyEdge is its battery-free operation. Instead of relying on traditional rechargeable batteries, it uses a Type-C connection to draw power directly from devices such as smartphones, power banks, or laptops. This plug-and-play functionality eliminates concerns about battery life or carrying additional chargers. Whether you’re in a rush or packing light, the TinyEdge ensures a hassle-free grooming experience, always ready to perform when needed.
The device is equipped with titanium blades, known for their durability and resistance to rust. These blades maintain sharpness over time, making sure a precise and comfortable shave. Paired with a high-speed motor capable of 7,000 revolutions per minute, the TinyEdge delivers smooth and efficient results. Its 0.07mm mesh ensures close contact with the skin, minimizing irritation and enhancing the overall shaving experience. Additionally, the shaver doubles as a nose hair trimmer, adding versatility to its functionality and making it a comprehensive tool for personal grooming.
Ease of Use and Practical Features
The TinyEdge is designed with user convenience in mind. Its magnetic structure allows for quick assembly and disassembly, simplifying maintenance. The device’s IPX7 waterproof rating ensures safe operation in wet conditions, making it suitable for both wet and dry shaving preferences. Cleaning is straightforward—simply rinse the shaver under running water. An automatic sharpening mechanism further enhances its practicality by maintaining blade performance over time, reducing the need for frequent replacements and making sure consistent results.
Modern Integration and Versatility
The inclusion of NFC functionality adds a modern touch, allowing the shaver to pair with compatible gadgets for additional features or settings. This integration reflects the TinyEdge’s commitment to innovation and adaptability. Whether preparing for a meeting, navigating airport security, or freshening up during a long day, the shaver adapts to various scenarios with ease and reliability.
The TinyEdge pocket shaver combines compact design, durable construction, and advanced technology to offer a versatile and dependable grooming solution. With its portability, innovative features, and user-friendly design, the TinyEdge ensures you can maintain a polished appearance wherever life takes you.
For a complete list of all available early bird specials, stretch goals, extra media and advanced features for the tiny pocket shaver that attaches to your phone for power, jump over to the official TinyEdge crowd funding campaign page by proceeding to the link below.
Source : Kickstarter
Disclaimer: Participating in crowd funding campaigns such as those found on Kickstarter and Indiegogo, involves inherent risks. While many projects successfully meet their goals, others may fail to deliver due to numerous challenges. Always conduct thorough research and exercise caution when pledging your hard-earned money.
Filed Under: Gadgets News, Top News
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
Chromebooks are very popular among students and professionals looking for an affordable device to get PC-like experience. It’s a clean and user-friendly OS developed and managed by Google. The OS receives improvement updates at regular intervals to ensure that all up-to-date features are included.
Chromebooks have had a split-screen feature for years, and it’s been improved since then. However, many users are still unaware of this feature and its potential. Therefore, in this article, we’ll see how to split screen on a Chromebook, along with its advantages and how it compares to Windows’ split screen.
What is Split Screen and What are Its Advantages?
A split screen is a highly useful feature that allows users to split or divide the screen of their device into two separate sections. Users can assign different actions to both sections, which means you can use two different apps or pages simultaneously on one single screen.
Coming down to its advantages, one of the best advantages of it is enhanced multitasking. The feature allows the user to work on two tasks simultaneously which indeed boosts multitasking and also increases productivity. The feature can also be used to do real-time collaboration wherein the user can chat with colleagues on one side of the screen while editing or watching presentation on the other. These are just a few advantages, but there are many more.
How to Split Screen on Chromebook
There are several different ways to use the Split Screen feature on the Chromebook. Let’s look at them one by one.
Split Screen using Maximize Button (for Browser/Web Pages)
Step 1: Open the browser or window you want to use.
Step 2: Now hover the cursor over the maximize button (the square icon in the top-right corner).
Step 3: Choose between half split or partial split depending upon your usage and then tap on the right or left edge until it snaps into place.
Step 4: Once the first window is snapped, you will be able to choose the second window or app on the other side of the split screen.
Split Screen using Maximize Button (for Apps and Progressive Web Apps)
Step 1: Open the app you want to use.
Step 2: Drag the cursor to the Maximize button and tap and hold until arrows appear next to it.
Step 3: Now choose the location where you want to keep the current app (left or right screen).
Step 4: You will be now prompted to select or open the app on the other side of the screen or leave it as it is.
Split Screen using Keyboard Shortcut
Step 1: Open the window you want to use.
Step 2: Press “Shift+[” to open the window on the right side of the split screen or press “Shift+]” to open it on the left.
Split Screen Using Touchpad Gestures
Step 1: Just like Windows, ChromeOS also supports touchpad gestures and you can use it to trigger split screen functionality. Simply do a three-finger swipe up before anything else.
Step 2: Now click and hold on the window you want to use on the split screen and drag it to the left or right side.
Step 3: Select the app or window you want to use on the other side of the split screen.
Split Screen using Touchscreen Gesture (only for Touchscreen supported devices)
Step 1: Open the app and do a one-finger swipe up and hold. This will open the overview menu.
Step 2: Now from the overview menu, tap and hold the window of your choice and then drag it to either side of the screen.
Step 3: Once done, you will be able to select the app on the other side of the screen.
Frequently Asked Questions
1. Is the Split Screen feature limited to certain devices?
Split screen is a software-based feature and hence, it is available for almost all modern Chromebooks. But, older models may not have the feature if are running on an outdated version of ChromeOS. Updating the Chromebook to the latest version can add the feature if it’s not there out of the box.
2. How does it compare with the Windows Split Screen?
Even though the Split Screen feature is very similar to both operating systems, there are some key differences. The usability of Chromebook is very straightforward, whereas Windows offers both simple and advanced layouts. Windows also allows more customization options than ChromeOS. So in a nutshell, there’s no clear winner. You can choose one per your preferences. Windows will get you more advanced control whereas ChromeOS will get you better usability and integration with Android apps.
3. Are all apps supported by the Split Screen feature?
Given that it’s a software-based feature, almost all the major apps and windows support the feature. However, certain apps such as Netflix might not fit well with the Split Screen because of the design limitations.
Final Verdict
These were the top methods using which you can trigger the split screen functionality on the Chromebook. It is a powerful feature that can enhance your multitasking capabilities and overall productiveness. Given that there are multiple methods to use the feature, you can use any easy method at your convenience.
Oppo, after rolling out the ColorOS 15 update for the Reno 10 Pro, A60, and A78 earlier this month, is now rolling out the Android 15-based update for the affordable Oppo A59 5G. Oppo has officially announced the update for users in India. With this major update, the Oppo A59 5G gets a bunch of new features that make the device even better.
Oppo has already released the update for many of its eligible devices, and with each release, they are getting closer to completing the rollout for all models.
The Oppo A59 5G was released in late 2023 with Android 13 based ColorOS 13 out of the box. This means the Android 15-based ColorOS 15 is the second major update for the Oppo A59.
This is a major update, meaning you can expect a lot of new features. However, since it’s an entry-level phone, it might not receive all the features like flagship phones. You can expect features such as new animations, app icons, themes, lock screen customization, limited AI features, and more. You can navigate to our dedicated article on ColorOS 15.
The update is being rolled out in phases, and it’s also available in the release candidate if you want to get it right away. To manually apply for early access, you can follow these steps, as advised by Oppo.
Go to Settings > About device > Tap the top of the page > Tap icon on the top right > Trial versions > Official version > Apply Now.
After some wait, check the Settings for the update. Once the major ColorOS 15 update is available, you can download and install it immediately. Before proceeding, make sure to back up your device, and also charge it to 50%.
After releasing the iOS 18.3 in the last week of January, Apple has now released a small minor update. The iOS 18.3.1 update is now available for eligible models including the iPhone Xr and newer models. The new minor update focuses on bug fixes and security improvements. It may also address some issues that are not widely known.
Last week, Macrumors reported that the minor update was coming, and it’s already here ahead of the iOS 18.4 beta release. Apple may begin testing iOS 18.4 as early as this week.
Along with the iOS 18.3.1 update, Apple also released the iPadOS 18.3.1, iPadOS 17.7.5, watchOS 11.3.1, macOS Sequoia 15.3.1, macOS Sonoma 14.7.4, macOS Ventura 13.7.4, and visionOS 2.3.1.
The latest minor update ships with build number 22D72 and is around 500MB in size depending on your device.
As mentioned earlier, this is a minor update and doesn’t bring big changes. Nevertheless, it’s an important update for users who’ve already installed iOS 18.3, as it addresses critical bugs and includes security updates.
If you have an eligible iPhone, the latest iOS 18.3.1 update will be accessible on the Software Update page within the Settings app. However, if you’ve opted for the beta, you might not get the update, but you can easily switch to the public build.
Before installing the update, make sure to take a backup of your important data and charge your phone to at least 50%.
If you could get a penny for every new scam online, you’d be on your way to becoming rich. If you got a penny for every person who has had their account hacked on Facebook, you’d be doubly rich. Not only do you have to contend with hackers hijacking your accounts or selling your information on the dark web, but now? Hackers are skipping the attempts to infiltrate your accounts but instead cloning your Facebook account.
What is Facebook cloning?
Now hackers are using your photos, name, and information to create new Facebook profiles. Once these fake duplicate profiles are created, they reach out to your friends and family to ask them to accept the friend request. Once accepted, they usually message friends and family for monetary assistance due to some bogus and urgent scenario.
What hackers commonly ask for with a cloned account:
Money
Additional personal information
Password and login information
Redirecting unsuspecting people to spam and scam websites
Yes, it seems unlikely that anyone would be duped so easily. Yet many people do get fooled. Most people also don’t hesitate to accept friend requests from people they think they already know. Due to their concern for their friend or family member, many rush in an effort to help someone they know with resources, access, or information.
HERE’S WHAT RUTHLESS HACKERS STOLE FROM 110 MILLION AT&T CUSTOMERS
What to do if your Facebook account has been cloned?
While not as complicated as having your Facebook account hacked, below are steps to take if your account has been cloned to minimize consequences.
1) Notify friends and family immediately that your account has been cloned and to not accept new friend requests from this account
2) Get as many friends and family to report the cloned account as possible.
Below are steps to take to report these cloned accounts:
On the cloned account’s profile, click the three dots under the profile banner
Select ‘Report Profile’ in the drop-down menu
Select ‘Fake account’ as the problem in the next drop-down menu
If you successfully reported the cloned profile, you should get a confirmation message showing the progress of their review of the account.
3) If your account is cloned, it doesn’t necessarily mean it is hacked, so check your settings to determine if anyone has access to your account before taking more stringent measures. To take more specific steps to secure your Facebook account from being hacked, follow the steps in 5 ways to make your Facebook account bulletproof.
HOW TO REMOVE FACEBOOK ACCESS TO YOUR PHOTOS
How to prevent Facebook cloning?
While it is difficult to prevent someone from cloning your Facebook account, there are some steps you can take to make it more difficult.
1) First, you can check if this is already happening by entering your name in the search bar on Facebook. While there may be multiple users with the same name, cloned accounts are usually identifiable because they try to use your photo to dupe your friends and family.
2) Make your Friend List private so no one can access it. This will make it harder for people, even in your network, to know who to contact with these cloned accounts.
3) Change your privacy settings for photos, videos, and information you post so people can’t use your photos and info to create profiles. Anything set to ‘public’ is fair game to be used by these hackers to include in their cloned accounts.
THE DARK WORLD OF FACEBOOK ADS WHERE SCAMMERS ARE TRYING TO STEAL YOUR MONEY
Kurt’s key takeaways
As long as social media exists, there will be bad ‘actors’ working every possible angle to take advantage of people and their networks. Aside from following best practices in keeping your accounts secure, it is now important to keep your personal information and media private. With hackers now cloning Facebook accounts, you might not even know about such an account until a friend or family member alerts you. With clear communication with your social networks on Facebook and enlisting their support to report the fake account, you can take steps to secure your presence on Facebook. While there will inevitably be another scam on Facebook, we will keep you notified and on high alert so you can nip it in the bud.
Has anyone ever cloned your Facebook account? Have you received a friend request from a cloned account? Let us know in the comments below.
FOR MORE OF MY TIPS, SUBSCRIBE TO MY FREE CYBERGUY REPORT NEWSLETTER HERE
What would it take for PEPE coin to achieve a 100% rally? The meme coin has been moving sideways for almost 2 weeks now, despite signs of accumulation.
This performance suggests that its bears have ran out of steam but the bulls haven’t garnered enough momentum for a sizable comeback.
PEPE exchanged hands at $0.000009603 at press time which means it was down by 65% from its all-time high in December.
It traded at price levels last seen at the start of its November 2024 rally. PEPE managed to rally by over 200% in November.
Its current price level could easily deliver a 100% uptick. A 100% gain means the meme coin would have to push to at least a $0.0000191.
Interestingly, that price tag is below its next major resistance zone near the $0.000021 price level.
– Advertisement –
PEPE Coin Struggles to Build up Momentum
As noted earlier, PEPE has been demonstrating signs of accumulation but demand has been relatively weak.
As a consequence, the bulls and bears have been locked in a stalemate with no signs of a clear winner.
PEPE price action/ source: TradingView
Among the bullish signs include the MADC’s upward trend ahead of its signal line, accompanied by bullish volume.
Even the MFI confirms that liquidity has been flowing back into the meme coin.
Perhaps the biggest explanation for PEPE coin’s weak demand could be the absence of whale demand.
Large holder net flows were significantly weaker in the last 2 weeks compared December and January.
PEPE large holder netflows/ source: IntoTheBlock
PEPE coin may finally bounce back once the bulls make a strong come back.
For now, price could also be prone to an unexpected price dip in case demand fails to put a foot forward.
The relatively weak whale activity reflects the recent dip in confidence in the market.
Nevertheless, on-chain data confirms that accumulation has been taking place.
Different classes of PEPE holders reveal more about the current market sentiment.
For example, cruiser (swing traders) balances grew from 136.66 trillion PEPE as of 10 December 2024 to 299.32 trillion PEPE as of 19 February.
PEPE balances by time held/ source: IntoTheBlock
Trader balances dropped aggressively from 208.5 trillion PEPE to 55.92 trillion PEPE during the same period.
HODLer balances dropped from 74.45 trillion PEPE to 62.31 trillion PEPE coin within the same time frame.
The key take-away from the balances by time held is that cruisers have been aggressively buying as prices dropped lower.
These are addresses that hold for weeks to months in anticipation of sizable price swings to profit from.
Meanwhile, traders have been declining sharply, signaling a declining focus on short term profit-taking.
This shift usually precedes a major price move. HODLer balances experienced their sharpest dip in November.
This confirmed profit-taking at the height of the last major bullish uptick. So far HODLer balances have not been accumulating.
Some potential reasons for this could be the weak market sentiment, lack of excitement and perhaps just waiting out the current bearish phase.
The Samsung Galaxy S26 Ultra is poised to capture attention in the competitive smartphone market. Combining advanced technology, refined aesthetics, and intelligent features, this flagship device is expected to set a benchmark for premium smartphones. Below, we delve into the most anticipated upgrades that could make the Galaxy S26 Ultra a standout choice for users seeking innovation and performance in a new video from Demon’s Tech.
Design Enhancements: A Sleek and Durable Build
Samsung is reportedly focusing on both durability and elegance for the Galaxy S26 Ultra. The introduction of titanium frames is expected to replace the aluminum used in previous models, offering enhanced strength while maintaining a lightweight structure. This shift not only improves the phone’s durability but also gives it a sophisticated, premium appearance that appeals to a wide audience.
Additional design refinements include a more integrated camera module, creating a seamless and polished look. New matte finishes are expected to reduce fingerprints, while an expanded range of color options provides greater personalization. These updates aim to blend style with practicality, making sure the device is both visually appealing and functional.
Camera Upgrades: Redefining Mobile Photography
The Galaxy S26 Ultra is set to transform smartphone photography with a 200MP telephoto lens, which could deliver unparalleled zoom capabilities and detailed portrait shots. This upgrade is particularly promising for low-light photography, where clarity and detail often suffer. Advanced sensors, such as the rumored HP9 or HP3, are expected to enhance hybrid zoom technology, allowing smoother transitions between optical and digital zoom.
AI-driven computational photography will likely play a significant role in improving image quality. By automating adjustments to lighting, color, and sharpness, the device could make professional-grade photography accessible to everyday users. Whether capturing landscapes, portraits, or night scenes, these advancements aim to simplify the process while delivering exceptional results.
Display Innovations: Brighter, Sharper, and More Efficient
Samsung’s expertise in display technology is expected to shine once again with the Galaxy S26 Ultra. The device may feature color filter on thin film encapsulation technology, which could make the screen brighter while reducing power consumption. This improvement would enhance visibility in direct sunlight, making sure a superior viewing experience even in challenging lighting conditions.
While under-display camera technology remains a possibility, it may not yet be included in this model. However, Samsung’s commitment to immersive visuals ensures the display will remain a key highlight, offering vibrant colors, sharp resolution, and smooth performance for gaming, streaming, and productivity.
Battery and Charging: Smarter, Faster, and Longer-Lasting
Battery performance is a critical factor for any smartphone, and the Galaxy S26 Ultra is expected to introduce silicon battery technology. This innovation could increase battery capacity without adding bulk, providing users with longer usage times. Paired with 65W fast charging, the device could significantly reduce charging durations, allowing you to quickly power up and stay connected.
Adaptive charging cycles are also anticipated, optimizing power delivery to minimize long-term battery wear. These features aim to balance convenience with sustainability, making sure the device remains reliable over its lifespan. Whether you’re a heavy user or someone who values longevity, these upgrades could enhance your overall experience.
Performance and Software: Power Meets Precision
The Galaxy S26 Ultra is likely to feature innovative processors such as the Snapdragon 8 Gen 4 or Exynos 2500, depending on the region. These chipsets promise faster speeds, improved energy efficiency, and better heat management, making the device well-suited for demanding tasks like gaming, video editing, and multitasking.
On the software side, the device is expected to run One UI 7, built on Android 15. This updated interface could offer enhanced multitasking tools, seamless ecosystem integration, and AI-driven features that make navigation more intuitive. Whether you’re managing multiple apps, editing photos, or connecting with other Samsung devices, the software is designed to streamline your workflow and improve productivity.
AI Integration: Smarter Tools for Everyday Tasks
AI is set to play a central role in the Galaxy S26 Ultra’s functionality. Generative AI tools could simplify complex tasks like image editing, allowing precise adjustments with minimal effort. Context-aware app suggestions and improved voice assistant capabilities are expected to make the device more intuitive, adapting to your habits and preferences over time.
Additional AI-driven features, such as real-time translation and smart replies, aim to enhance communication and productivity. These tools could transform the Galaxy S26 Ultra into a versatile assistant, capable of supporting both personal and professional needs. By integrating AI into everyday tasks, Samsung is positioning the device as more than just a smartphone—it’s a tool for efficiency and convenience.
Setting a New Benchmark for Flagship Smartphones
The Samsung Galaxy S26 Ultra is shaping up to be a pioneering device in the smartphone market. With its premium materials, advanced camera system, innovative display technology, and AI-powered features, it promises to deliver a comprehensive and innovative user experience. Whether you’re a tech enthusiast, a creative professional, or someone seeking a reliable and innovative device, the Galaxy S26 Ultra could redefine your expectations of what a flagship smartphone can achieve.
Explore further guides and articles from our vast library that you may find relevant to your interests in Samsung Galaxy S26 Ultra.
Source & Image Credit: Demon’s Tech
Filed Under: Gadgets News
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
Generative AI art is currently a major trend in the AI world right now. You can create images using different Generative AI tools, one of the most famous tools is Fooocus. It lets you create realistic image generation, face swapping, image upscaling, inpainting, and outpainting. All these features are powered by the Stable Diffusion.
Fooocus works seamlessly on Nvidia and AMD GPUs. However, setting it up on a PC with Intel’s Arc GPU is more complex compared to straightforward installation. If you want to install and use Fooocus AI on your Intel Laptop powered by the Intel Arc GPU, you landed in the right place.
If you follow the official installation process from Fooocus’s GitHub page, you may encounter this error “Found no NVIDIA driver on your system.” You can easily resolve this issue, whether your system has Intel Arc A-series, B-series, 130V, or 140V graphics, you can follow our step-by-step guide to run Fooocus on your system.
Steps to Install Fooocus AI on Intel Arc GPU PCs
Reddit user, Electronic-Extent460, shared a step-by-step guide that helps me run Fooocus AI on my Lenovo Yoga Slim 7i Aura Edition powered by Intel Lunar Lake 258V chip and Arc 140V GPU. Let’s take a look at the steps.
Step 1: Download and Install Python 3.10
You need to install Python 3.10 on your PC, you can easily download it from this page.
Step 2: Download and Install Git on your PC
The next thing you need to do is, Install Git on your PC, here’s the download link.
Step 3: Open Command Prompt as an Administrator
Go to Start and type CMD, now click on Run as Administrator.
Step 4: Test If Python is Installed or Not
Before moving ahead, we need to check whether Python is installed. You can type this simple command.
python
Step 5: Change the User Directory
Change the directory by entering this simple command:
cd \users\YOURUSERNAME
Don’t forget to change YOURUSERNAME with your window’s user.
Step 6: Install Fooocus on your System
Now we can clone the Fooocus directory from GitHub on our PC, by running this command. The process may take some time so please wait after running this command.
git clone https://github.com/qiacheng/Fooocus
Step 7: Enter the Fooocus Directory
After cloning the Fooocus on your PC, you need to enter the Fooocus Directory. Run the following command:
cd Fooocus
Step 8: Create and Manage Python Environment
Enter this command.
python -m venv venv
In the next step, we need to change the directory.
venv\scripts\activate
Step 9: Install the Requirements
Run this command to download and install the required packages.
pip install -r requirements_versions.txt
Step 10: IMPORTANT STEP – Install Required Extension for Intel Arc GPUs
Make sure to install Intel Extension for Pytorch, it will download the required extensions.
It will download default models and other required packages when launched for the first time. So, you need to wait to complete the download and installation process. The model is quite hefty weighing around 6GB in download size.
Once done, you can start using Fooocus on your PC.
Run Fooocus on Intel Arc GPUs After Installation
For future usage, you can launch Fooocus by running three simple commands. Before launching it, please ensure you are inside the Fooocus folder directory. Now you can run following commands one by one.
You can also make a .bat file if you want to skip running it by entering these commands. Here’s how you can make a .bat file for your system
Make a Bat File to Launch Fooocus on Intel Arc GPU PCs
Step 1: Open Notepad
Step 2: Copy and Paste the below code in Notepad, make sure to change the directory path according to your PC (replace this path “C:\path\to\Fooocus”).
@echo off
cd /d "C:\path\to\Fooocus"
python -m venv venv
call venv\scripts\activate
python.exe -s entry_with_update.py --unet-in-bf16 --vae-in-bf16 --clip-in-fp16
Step 3: Save the file as run_fooocus.bat
That’s it. Now you can double-click the run_fooocus.bat file to launch Fooocus on your PC.
If you find this guide helpful, feel free to share it with your friends. Still have queries, drop them down in the comment box.
If you are an iPhone user, Apple CarPlay needs no introduction. Although the CarPlay setup process is a breeze, sometimes it acts weirdly and throws some annoying errors, making it tough to access and use.
One common problem that iPhone users face while using Apple CarPlay is the infamous black screen issue or error, whatever you call it. Now that you are here, we are aware that you are seeing a black screen when accessing Apple CarPlay.
We also know that you must be scratching your head, thinking, why is my CarPlay connected but the screen is black? Worry not, that’s what we are here for. Along with the fixes, you’ll also learn about the possible causes of the Apple CarPlay black screen issue. So, without wasting any further time, let’s jump right in. Shall we?
Why does my Apple CarPlay screen go black?
Honestly, it’s quite hard to pinpoint why exactly Apple CarPlay is showing a black screen. However, from our past experiences, we’ve listed some common reasons below that trigger this issue with Apple CarPlay.
Your CarPlay screen could go black due to some compatibility issues with the iPhone model you’re using.
In the case of wireless Apple CarPlay, a faulty Bluetooth connection is mostly the culprit.
A minor software glitch can also result in your car screen going black with CarPlay.
If you forget to enable CarPlay settings on your iPhone, the CarPlay is inaccessible on your car.
While we don’t care much about the car infotainment system, its outdated firmware can cause CarPlay to show a black screen.
In the case of the wired connection, a frayed, damaged, or incompatible USB-C cable can also trigger the issue.
A faulty iOS update or an iPhone running an outdated iOS version could also cause your Apple CarPlay screen to go black.
Now that you are aware of the possible reasons why your Apple CarPlay screen is black, it’s time for you to try some tried and tested solutions to fix the issue.
Also read: iPhone Won’t Connect to Apple CarPlay? Here’s How to Fix
How to Troubleshoot and Fix Apple CarPlay Screen Black Issues
As we mentioned earlier, Apple CarPlay can be pretty handy when you are behind the wheel and looking for directions or simply want to enjoy your favorite playlist.
But, there’s always the possibility of things going south, which can be super annoying. If you are among those frustrated with the Apple CarPlay black screen issue, below are a few things to try so you can resolve it.
Note: The troubleshooting methods given below are in random order and sometimes may be unrelated to the reasons we mentioned above.
1. Compatibility is the key
While most modern-day iPhones work flawlessly with Apple CarPlay, we can’t say the same for all iPhones out there. In case you are trying to use Apple CarPlay with a tad-old iPhone, older than the iPhone 5, you should know that it’s not possible. You can visit this official page to check if your iPhone is compatible with CarPlay or not.
2. Reboot your iPhone when you see the black Apple CarPlay screen
Restarting your iPhone is the first and easiest method to resolve the issue where CarPlay is showing a black screen.
Image: YTECHB
Here’s how to do it:
Press the side button and either of the volume buttons together on your iPhone
Now, slide the power button animation on the screen to shut down your iPhone
Then, wait for a few seconds and power on your iPhone.
This method has been effective in resolving multiple CarPlay-related issues, so it’s best to give it a try.
Also read: How to Install Apple CarPlay in Older Cars – Tested Methods
3. Restart your car to fix CarPlay black screen
Similar to iPhones, restarting your car can freshly start up its infotainment system, eliminating any bugs, errors, or issues. These days, modern cars offer the option to restart the stereo system separately. So in that case, you don’t need to restart your car.
4. Update your iPhone
It’s possible that your iPhone with the current version of iOS may be throwing the CarPlay black screen error. Sometimes when the issue is widespread, Apple generally pushes an update to fix the issue. However, when the issue is limited to some users, which might be the case with you, it’s still recommended you update your device to the latest version of iOS. Here’s how you can do it.
Head to Settings on your iPhone.
Now, go to General and select Software Update.
Then, wait for the system to scan for any new updates. If a new update pops up, make sure to install it as soon as possible.
Image: YTECHB
5. Check Wired & Wireless Connection to Apple CarPlay
If updating the iPhone doesn’t fix CarPlay black screen, it’s time to check the connection between your car and iPhone. Let’s first look at troubleshooting the wired connection.
For wired connection:
First, ensure that the USB cable that you are using is perfectly fine. In other words, it shouldn’t be loose or broken by any chance.
Next, you need to make sure that the cable you are using to connect your iPhone to your car is properly plugged in. To ensure a secure connection, it’s always recommended to unplug the cable and replug it.
If you’re still unable to get the CarPlay to work, you can try using a different cable to rule out the connection issue.
For wireless connection:
If there is any issue related to their range, you might end up seeing the black Apple CarPlay screen. Therefore, you should keep Bluetooth and Wi-Fi enabled all the time.
Image: YTECHB
Sometimes faulty Bluetooth and Wi-Fi settings can cause the CarPlay section of your car screen to go black. You can fix the faulty or corrupted settings by resetting the network settings on your iPhone. To do so, head to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings.
Image: YTECHB
Finally, you should ensure that your car’s infotainment system is in Bluetooth or wireless mode for CarPlay to work as intended.
Also read: How to set up Apple CarPlay on Toyota Vehicles
6. Forget Your Car from iPhone CarPlay Settings
If you don’t find any issue with the connection to CarPlay, please make sure to forget your car from the CarPlay settings. Not only it will reset the connection between your iPhone and your car’s infotainment system, but it will also resolve underlying connection issues. It works similarly as Wi-Fi and Bluetooth reset. Here’s how to do it.
Go to Settings on your iPhone
Head to General and tap CarPlay
Now, open CarPlay to select your car, and tap Forget this car option.
7. Check Privacy & Content Restriction settings on your iPhone
Although it’s unlikely, you may have disabled CarPlay from inside the Content & Privacy Restrictions settings, which why your CarPlay is not connecting and showing a black screen on the car’s infotainment screen.
To fix this, simply enable the toggle switch for the CarPlay option from that setting. To do so, head to Settings > Screen Time > Content & Privacy Restrictions > Allows Apps & Features > toggle on the switch beside the CarPlay option as shown in the image below.
Image: YTECHB
FAQs about Apple Carplay black screen issue
1. Why is my Apple CarPlay screen black?
There are multiple reasons why CarPlay remains connected but the screen is black. In most cases, software glitches, connection issues, and incompatibility are culprits behind this infamous problem.
2. How can I fix a black screen on Apple CarPlay?
As a simple trick, you can restart your iPhone, check CarPlay settings, and reset the network settings of your iPhone. If that doesn’t fix the problem, you may have to check for connection issues, and more.
3. How to prevent the Apple CarPlay screen from going black?
Well, you can keep your iPhone and car’s infotainment system updated, use high-quality USB cables for wired connections, and most importantly keep the CarPlay settings always enabled on your iPhone.
Summing up
As with every other app and service, Apple CarPlay is also prone to several issues that may give an iPhone user a headache. So, rather than being frustrated, it’s important to understand the underlying cause of the issue and act accordingly. Moreover, the above solutions are quite similar to most CarPlay-related problems, but these are the ones that might help you with the Apple CarPlay black screen issue.
